How To Paint 6 Panel Door

Probably the to the lowest degree expensive yet most impactful ways you tin update the expect of your exterior front entry is to paint the forepart door.

Such a huge clamper of colour, front-and-centre, is certainly one of the most visual aspects of your front entry space. That'due south why picking the perfect forepart door colour and painting information technology correctly is vital if y'all want to requite off the best possible commencement impression. It's a simple and straightforward procedure. (Just be certain that you lot're prepared to leave your door open the entire day.)

DIY Paint Front Door-before painting process

How to paint the front end door: Step by Pace Guide

Step 1: Choosing the colors

Look at the color(s) on your business firm. You lot'll want to cull something that goes with the rest of the house, first and foremost. This example shows a house with a brown-tan-orangey stone face.

These are non among the homeowner's favorite hues, only they had to exist taken into consideration before selecting a door color. Because orangish and blue are complementary colors, and the previous door was quite dark, it was determined that a lighter/softer shade of warm blueish would be prissy.

Many pigment chips were collected that hovered around this idea, then they were taped to the door and analyzed. (The color selected is called "Watery" by Home Decorators Collection, a lovely bluey-greeny-grey.)

Step 2: Sandpaper process

Take a bit of 220-dust sandpaper and start sanding your door confront. First past gently sanding the grooves, if your door has whatever. Tip: Y'all want to sand away major imperfections, but you lot don't need to spend forever sanding.

So move on to the flat surfaces. Looks like the color before ebony was a shade of cobalt blue.

When performing a quick, light sanding, information technology's helpful to keep in mind that you're non necessarily out to accomplish a compatible color in the sanding. Some sections are spring to need a chip more sanding; others, significantly less. If you find yourself looking at an area that seems to need more sanding, become by feel instead of by look – stop sanding every few seconds and run your fingers over the area. If information technology feels smooth, no matter what it looks like, y'all tin motility on.

Step 3: Wipe cleaning

Wipe down the door with a cleaning cloth. Or a baby wipe.

When your wipe-down has dried completely

Step 4: Taping proces

When your wipe-down has stale completely, it's time to record off everything you lot don't desire painted. Notation: It's a adept thought to simply remove all hardware before painting. That way, you can get an fifty-fifty sanding done, and y'all don't run the risk of pigment dripping on your doorknob or keyhole.

This case avoids removing the door's knob and lock because those pieces had to be rather trickily installed past a locksmith due to some weird issues on our onetime door, and so in place they will remain, covered deeply with tape.

Too, considering y'all will be painting the inside lip of your door (the face that touches the doorjamb), it'due south a expert idea to run a piece of painter's tape down the border.

Footstep 5: Choosing the primer

Grab your outside pigment. I recommend (along with many painting pros) a combination paint + primer to save yourself a step while achieving a uniform paint glaze. Otherwise, employ two coats of primer and then outside paint on tiptop of that.

Double check the color you choose for door paint

Admire your chosen color. Oh, yes. I think you're gonna like information technology here, Watery.

In that location'south a method to painting a door that makes it look great at the end, and I'g going to share information technology with you lot now. Brainstorm past painting the angled perimeter of a top panel (i of the 6 rectangular panels on this door) with a brush. This first glaze should be a light i; don't worry if some of the old paint colour shows through in parts. You'll go information technology covered shortly plenty with the second/third coats.

Footstep 6: Add the color

Pigment the entire panel, and then move on to the neighboring panel, still with a castor. Stop there for a minute. Make sure, as you're painting these, that the edges of whatsoever new paint brush strokes are smoothed out immediately. If you lot leave them, fifty-fifty for 30 seconds, they can offset to gear up a bit, which makes for a very united nations-smooth finish issue. Be constantly watching for drips and drops and pigment running, and swipe them abroad immediately.

use foam roller on flat surface around sections

Next, for the first glaze, y'all can take a high density foam roller and pigment the apartment parts effectually the two panels y'all've only detailed. Again, sentry the edges of your new paint swipes; if in that location is even a small-scale scrap of excess pigment that is left to sit there, information technology volition start to set up and make an ugly bump or line when you lot paint over it later.

Don't forget about the inside of the panels, if applicable. Proceed this society – brush grooves, cheque pigment edges, roll perimeter, check for paint drips, curl interior, watch out for weird paint globs – for every console on your door.

Don't forget about the doorjamb lip(south) – paint the knob 1 for certain, and the hinge one if y'all want.

Allow everything dry (typically for about four hours, if yous did as you were supposed to and kept the beginning coat of paint a calorie-free one).

Pace vii: Sand the new fresh pigment

Grab your 220-grit sandpaper, and do a very light sanding all across the door. You're not trying to sand through this paint coat, y'all only are sanding away any slight pigment bumps if they came upward because you forgot once or twice to smooth out the edges of your new paint swipes. Don't worry, we've all been there. Simply sand 'em down.

Step viii: The second coat of pigment

For the second coat (and third, if you want…this tutorial did three coats), continue in the same method of painting the angles around each console. Paint equally though you lot're post-obit a woods grain, fifty-fifty if in that location isn't one on your door, or if it's buried under 28 other coats of paint.

The just exception to this is the horizontal lines created past the acme and bottom angled edges of each panel; paint those sideways. (Or, really, however you prefer.) Because I similar the quaint wait and experience of a brush-painted door, I used only the brush for the 2d and third coats; no foam roller for me here. That'due south a preference telephone call, though. It'southward certainly faster with the foam roller.

Step nine: Removing the protective tape

Carefully remove any tape after your last glaze, whether that'southward the second or 3rd, while it's notwithstanding wet.

Let it dry.

Stand up back, and close your door then you lot tin can see information technology with the rest of the house. Are y'all pleased?

Was the colour choice a skilful ane for your space?

The colour always looks a bit dissimilar when actually painted on. We love this one, though, considering it adds a cool, contemporary element to the surrounding (dated) stone face.